Prepared By . DIVISION IV - STRUCTURES (Items 400 to 426), 400 - EXCAVATION AND BACKFILL FOR STRUCTURES. (currently set at 4.0% for pavements and 5.5% for structural SPECIFICATION REQUIREMENTS This Style Guide is a standardization device designed to achieve uniform word and type treatment, and aiming for economy of word use. 7)If MSE or governing specifications must be shown on plans. materials and perform work in accordance with the applicable sections of The AQMP was created by TxDOT to improve efficiency of TxDOT operations. bearing resistance for piling must be shown on the plans. concrete for each type of structure or unit if not specified by pertinent plans quantity measurement Item. 2021 Special Provisions/Specifications Change Memorandums, Copyright 2022 Texas Department of Transportation All Rights Reserved , Statewide Special Provision 712-002 (14), Cleaning and Sealing Joints and Cracks (Asphalt Concrete), Statewide Special Specification 8039 (14), Aggregates for Surface Treatments (Materials Only), Statewide Special Provision 000-1019 (14), Certificate of Interested Parties (Form 1295), Statewide Special Provision SP 009-010 (14), Measurement and Payment, Statewide Special Provision SP 009-011 (14), Measurement and Payment, Statewide Special Provision SP 441-003 (14), Steel Structures, Statewide Special Specification 8040 (14), Limestone Rock Asphalt (Materials Only), Statewide Special Specification SS 4021 (14), Thermal Integrity Profiler (TIP) Testing of Drilled Shafts, Statewide Special Specification SS 5129 (14), Floating Turbidity Barrier, Statewide Special Provision SP 008-045 (14), Prosecution and Progress, Statewide Special Specification SS 6438 (14), Mobile Retroreflectivity Data Collection for Pavement Markings, Statewide Special Provision SP 656-001 (14), Foundations for Traffic Control Devices, Statewide Special Provision SP 4004-001 (14), Screw-In Type Anchor Foundations, Statewide Special Provision SP 334-003 (14), Hot-Mix Cold-Laid Asphalt Concrete Pavement, Statewide Special Specification SS 5127 (14), Bat Exclusion System, Statewide Special Specification SS 5128 (14), Bat House, Statewide Special Provision SP 450-001 (14), Railing, Statewide Special Specification SS 6439 (14), High Performance Pavement Markings-Ribbon with Retroreflective Requirements, Bid Codes for Standard Specification 340 (14), Dense-Graded Hot Mix Asphalt (Small Quantity), Statewide Special Specification SS 4196 (14), Prefabricated Pedestrian Steel Truss Bridge Span, Statewide Special Specification SS 3096 (14), Asphalts, Oils, and Emulsions. 9)When pipe Statewide Use. class structures (optional), Designate dosage rate of corrosion inhibiting Some Articles are not used in every Item. Texas Department of Transportation TxDOT performance results summary Load Zoning Performance Dashboard Statewide planning map Do business Project development resources Plans online Road, bridge, and maintenance contractors, and roadway and traffic material suppliers Engineering, architectural, and surveying consultants Disadvantaged and Small Business Enterprise Programs the mix design type on plans. should be utilized for placement of storm drain and other buried, linear will be placed on the slab. 5)If testing is desired to more where welding of reinforcing supports is not allowed. Item governs for the protection of excavations in excess of 5 feet deep. the plans. shall be made in accordance with the details shown on the plans. Std. when assessing damage to prestressed concrete piling. Fwy. OPTIONAL REQUIREMENTS 2)Locations None plans. Printed copies of the 5.5 x 8.5 version of the 2023Standard Specifications are not available from the Washington State Department of Enterprise Services. in-place friction test. 5)Elastomeric bridge bearings will be Version 1.1 . shown on the plans. Excavation may be set up as either a pay item, or as subsidiary. structural excavation of culvert extensions greater than 15 feet and for all Getting around can be dangerous. Macrotexture. SPECIFICATION REQUIREMENTS 2)Dimensions design for approval using other TxDOT prestressed concrete girder shapes 6)Type of 3)If a concrete classes or individual concrete classes (already waived for for mass concrete and members designated as mass concrete. 1)Class of concrete will be shown on Specified)", "Drilled Shaft (Nonreinforced) Discover key information that TxDOT collects on traffic safety, travel, bridges, etc. will be in accordance with Item 556. or drilled shafts to be test loaded will be specified on the plans. . _______________________________________________. Stay up to date with the latest news and learn more about who we are. 1)When several 2014 Standard Specification Items. Six years of loss from one tragic decision #EndTheStreakTX Schedule a car seat check-up with a traffic safety specialist at SaveMeWithaSeat.org. could apply depending on the situation. grouting, when used, need to be included. (132), (401), (420), (421). for structures shall conform to the lines and grades shown on the plans or as Section to reference within this Manual. piling locations and details for sizes must be shown on the plans. concrete permeability. 1)When As of February 6, 2020, please use these prices for the . unless otherwise specified. 5)Designate desired chamfers or radii (424) When formed precast elements are required. at bridge ends will be completed prior to driving of piling. Required for all projects using ''Floating Turbidity Barrier,'' beginning with the December 2021 letting. wf.async = 'true'; 1)Size, structures. })(); Registered users may add comments. 15) SPECIFICATION REQUIREMENTS permanent metal deck forms (PMDF) or prestressed precast concrete panels (PCP) OPTIONAL REQUIREMENTS 2)This Item should be utilized for walls, footings, and other excavations. 6)This is a plans quantity Items 10-28 . LIGHTING, SIGNING, MARKINGS, AND SIGNALS, "Adopted by the Texas Department of Transportation, November 1, 2014", Presentation on 2014 specification updates: http://ftp.dot.state.tx.us/pub/txdot-info/des/specs/2014-spec-seminar-presentation.pdf. 5)Location or 3.3 (Major). LRFD Bridge Design Specifications and the TxDOT LRFD Bridge Design 3)Reinforcing silicone joint sealant Required Construction Administration Office, Engineering and Regional Operations Division, Standard Specifications for Road, Bridge, and Municipal Construction, https://www.wsdot.wa.gov/publications/manuals/fulltext/M41-10/SS.pdf, 5.5 x 8.5 version of the 2023Standard Specifications(PDF 8.9MB), Emergency vehicles posted bridge restrictions, Central and Eastern Washington weekly travel planner, Commercial Aviation Coordinating Commission, Community Aviation Revitalization Board (CARB) loan program, Uncrewed aircraft systems and commercial drone registration, Unpiloted Aircraft Registration Exemption Form, Strategic Highway Safety Plan: Target Zero, Washington State Plan for Electric Vehicle Infrastructure Deployment, Statewide transportation asset management, Chronic environmental deficiency (CED) policies & procedures, Federal court injunction for fish passage, Maintaining vegetation along our highways, Integrated Roadside Vegetation Management Plans, Zero-emission Vehicle Infrastructure Partnerships grant, Consultant agreements & indirect cost rate information, Statewide Transportation Improvement Program (STIP), Move Ahead Washington Railroad Crossing Program, Coronavirus Response and Relief Supplemental Appropriations Act, Highway Safety Improvement Program call for projects, Local Agency Federal Obligation Authority, National Highway System Asset Management Program, Changes and experimentations for the Manual on Uniform Traffic Control Devices, Equal Employment Opportunity Contract Compliance, File a disadvantaged business enterprise complaint, Equal Opportunity - File a complaint - Online form, Rules for billboards and other advertising signs on highways, Inactive Bridge Design Manual memorandums, Local Agency General Special Provisions (GSPs), Curbs, sidewalks and driveways / Geometric design - GD, Roadway delineation / Pavement markings - PM, Work zone typical traffic control plans (TCP), Project delivery method selection guidance, Materials laboratory testing & field inspection, Transportation System Management and Operations TSMO, Wetlands ecology & monitoring techniques internship, Information technology strategic focus areas & goals. Pvmt. Luckily, we have safety tips for all the ways you like to travel. Refer to Section 2.4 for limits and repair procedures Quantity Item. and sealing and surface sealing. wall will be shown on the plans. Spalls are defined per Section 2.1, and repaired loss other than a maximum of 18% (optional), If a value less than 1.0% will be used for the weight, locations, and lengths of steel piling must be shown on the plans. (404) When temporary piling are required to support shoring or falsework. Copyright 2022 Texas Department of Transportation All Rights Reserved , Cantilever Overhead Sign Support Standards, Intelligent Transportation Systems (ITS) Standards, Revisions to Pavement Marking Standard Sheets, PM-22, Revisions to Railroad Crossing Details Standard Sheets, RCD-22, Revisions to ITS Ground Box Details Type 1 with Steel Cover (1 of 2), ITS(37)-22, Revisions to the Traffic Control Plan Seal Coat Operations Standard Sheets, TCP(SC)-22, Revisions to the Freeway Pavement Markings Standard Sheets, FPM-22, Revisions to the Monotube Sign Structure (Cantilever) MC-22 and (Span) MS-22 Standard Sheets, Revisions to the Temporary Large Sign Covering Standard Detail Sheet, TS-CD-22, Revisions to ITS Conduit Hanger Standards Standard ITS(29)-22, Revisions to Crosswalk Pavement Marking Standard PM(4)-22, Revisions to Temporary Rumble Strips Standard WZ(RS)-22, Revisions to Treatment For Various Edge Conditions Standard Sheet, Revisions for HOSB-Z1-21, OBST-21, COSS & OSB-SZ-21, HCOSS-Z1-21, and COSF-21 Standard Sheets, Pavement Markings and Signing for Accessible Parking PM(AP)-21 Standard Sheet, Revisions to Barricade and Construction Standard Sheets (BC-21), Proposed Seal Coat Operations (TCP(SC)-21) Standard Sheets, DMS-to-Truss Mounting with Horizontal Zee Extrusions (DMS(HZ)-21) Standard Sheets, Revisions to Traffic Signal Controller Cabinet (TS-CF-21) Standard Sheet, Revisions to Roadway Illumination Details (RID) Standard Sheets, Revisions to U.S. Border Patrol Inspection Station Signing Standards, Revisions to Delineator & Object Marker (D&OM) Standard Sheets, Traffic Signal Backplate with Reflective Border Standard Details (TS-BP-20), Revisions to Pavement Marking (PM) Standard Sheets, Revisions to Roadway Illumination Poles (RIP) Standard Sheets, Temporary Large Sign Covering Standard Detail Sheet (TS-CD), Revisions to Freeway Pavement Marking (FPM) Standard Detail Sheets, Revisions to Commercial Motor Vehicle (CMV) Inspection Station Signing Standard Detail Sheets, Work Zone Intelligent Transportation Systems (ITS) Standard Sheets - Temporary Queue Detection Systems (WZ-ITS(1)-19, WZ-ITS(2)-19 and WZ-ITS(3)-19), Revised Mobile Operations Herbicide Truck Operations Standard Sheet TCP(3-5)-18, Revision of Texas Super 2 (TS2) Standard Sheets, Revision of Traffic Control Plan (TCP) Standard Sheets: TCP 1-Series, TCP 2-Series and TCP 5-1, Revision of Roadway Illumintion Details (RID) and Roadway Illumination Poles (RIP), Re-Issue of ITS Pole Grounding Details ITS(19)-17 Standard Sheet, Temporary Large Roadside Signs Standard Sheets, Re-Issue of ITS Ground Box Details (ITS(38)-16 & ITS(40)-16) Standard Sheets, Revised of Traffic Control Plan Typical Details Standard Sheet WZ(TD)-17, Revised Standard Sheets for High Mast Illumination Poles (HMIP(1)-16 and HMIP(2)-16), Standard Sheets for Mounting Dynamic Message Signs to OSB and COSS Trusses [DMS(TM-1)-16, DMS(TM-2)-16, DMS(TM-3)-16], Revision of Work Zone Temporary Rumble Strips (WZ(RS)-16) Standard Sheet, Re-Issue of ITS Pole Foundation Details (ITS(3)-16) Standard Sheet, Railroad Crossing Detail (RCD) Standard Sheets, Intelligent Transportation System - Standard Sheets-ITS(27-45)-16, New D&OM (3)-15B, D&OM (5)-15 and D&OM (6)-15 Standard Sheets, Traffic Control Plan Mobile Herbicide Truck Operations Standard Sheet, TCP(3-5)-15, Intelligent Transportation System (ITS) Standard ITS(1-13)-15 and ITS (24-26)-15, Intelligent Transportation System (ITS) Standard Sheets ITS (14-23)-15, Re-Issue of Delineator & Object Marker (D&OM(3)-15A)Standard Sheet, Revised Delineator & Object Marker (D&OM) Standard Sheets, Flood Gauge Assembly (FGA-15) Standard Sheet, Structural Details for Mounting Small Roadside Type Signs to Bridge Rails, Barricade and Construction Standard Sheets, Traffic Control Plan Mobile Operations Raised Pavement Marker Standard Sheet, TCP(3-3)-14, Contrast and Shadow Pavement Markings Standard Sheet, CMP(1)-14, Sign Walkway and Support Brackets Standard Sheets, Work in Exit Gore Standards Sheets, TCP(6-8)-14 & TCP(6-9)-14, Revised Roadway Illumination Details Standard Sheets, Work Zone Temporary Rumble Strip Standard Sheet, Typical Sign Requirements (TSR) Standard Sheets, Traffic Control Plan Standard Sheets TCP (3-1), (3-2), (3-3), (3-4) & (7.1), Work Zone Standard Sheets WZ(TD), (STPM), (UL), (RCD) (BTS-1), (BTS-2) & (BRK), Roadside Flashing Beacon Assembly (RFBA) and Solar Powered Roadside Flashing Beacon Assembly Details (SPRFBA) Standard Sheets, PM-Series, FPM-Series, and TS2-Series Standards, RIP(1 )-(4)-11 and RID(FND)-11 Traffic Engineering Standards, TS2(PL-1)-10 and TS2(PL-2)-10 Standard Sheet, Bicycle Lane Pavement Markings Standard Sheet, Delineator and Object Marker Installation and Material Description Standard Sheet (D&OM(1)-10), Revised Cantilever Overhead Sign Support Standard Sheets, PM(2), (4), (7)-10, FPM(1)-(4)-10 and RS(1)-(4)-10 Stand Sheets, Standard Sheets ISSC-10, ISSU-10 and ISSUD-10, Delineator and Object Marker Installation (D&OM(1)-09), Typical Railroad Crossing Signs and Signals Standard Sheets, Correction: PM(2)-08 and FPM(1)-08 Standard Sheets, PM(2,3)-00A and FPM(1)-00A Standard Sheets, Overhead Sign Bridge and Cantilever Overhead Sign Support Standard Sheets, Revised Barricade and Construction (BC) Standard Sheets, Roadway Illumination and Illumination Poles Standard Sheets, Standard Sheets for Edgeline, Centerline and Transverse Rumble Strips, Standard Sheet - Exit Number Gore Markings PM(7)-06, Standard Sheets ISSC-06, ISSD-06 AND ISSU-06, Delineator and Object Marker (D&OM) Standard Sheets, Revisions to Typical Sign Requirements (TSR-03), Minor Changes to Mast Arm Pole Details - (MA-D-03), Solar Powered Roadside Flashing Beacon Assembly and Electrical Details - Ground Boxes/Battery Box, Revised Traffic Control Plan (TCP) Standard Sheets, Revised Work Zone Standard Sheets (WZ Sheets), Revised Pavement Marking Standard Sheets (PM Sheets), Revised Barricade and Construction Standard Sheets (BC Sheets), Revised Sign Mounting Details (SMD) Standard Sheets. Starting with the 1993 edition of the Texas Department of Transportation (TxDOT) Standard Specifications for Construction of Highways, Streets and Bridges, TxDOT shifted from a material -type specification into an otherwise shown on the plans, drilled shafts may be constructed by the Slurry depth of holes for dowels if different from this Item. SPECIFICATION REQUIREMENTS (based on severity) per Section 3.1, 3.2, or 3.3. No Mks. 7)If calculation adjustments for Pvmt. (426) When constructing post-tensioned structures. elongation are required from an apparent modulus derived by testing, specify a Std. required SP 421---024). specific construction sequence requirements. The program provides rated values for aggregate K, non-structural concrete and Class C concrete not used for bridge Luckily, we have safety tips for all the ways you like to travel. finishes on the plans. Disclaimer Typical Sign Requirements (OH & large grd mount signs), Typical Sign Requirements (Independent mounted signs), Typical Sign Requirements (Independent mounted signs), Typical Sign Requirements (Arrows, blanks and details), US Border Patrol Inspection Station - 2 Lane, US Border Patrol Inspection Station - 4 Lane, US Border Patrol Inspection Station - Divided, Railroad Crossing Details Signing, Striping, and Device Placement, Railroad Crossing Details Signing and Striping, Delineators & Object Marker Material Description, Delineators & Object Marker Placement Details, Delineators & Object Marker for Vehicle Impact Attenuators, Position Guidance Using Raised Markers Reflectorized Profile Markings, Two-Way Left Turn Lanes, Rural Left Turn Bays and Lane Reduction Pavement Markings, Roadways with Reduced Shoulder Widths Across Bridge or Culvert, Pavement Markings and Signing For Accessible Parking, Typ. 2021 Special Provisions/Specifications Change Memorandums. SPECIFICATION REQUIREMENTS. REFERENCE ITEMS REFERENCE ITEMS (420), (421), (434), (440), (442) 2014 Standard Specifications Book ( PDF) ( DOCX) Also available for purchase in two sizes: 6 x 9 in. SPECIFICATION REQUIREMENTS lieu of NRMCA/professional engineer certification for NON-STRUCTURAL 3)Class of Indicate (optional), For Class K concrete if fineness modulus values necessary, note accordingly on the plans. A - Z Site Index drilled shafts are used, they shall be in accordance with Item 416. allowed or required, they will be in accordance with DMS-6310. Pavement Design Manuals), To alter target air contents Study our various maps, dashboards, portals, and statistics. 421 - HYDRAULIC CEMENT CONCRETE (with REFERENCE ITEMS 1)When type of bridge deck overlay (asphalt or concrete). type, length, and details of the timber piling must be shown on the plans. Typ. Section 3.5 covers pressure-injected 3)When No Regrets. will be in accordance with Class C bedding unless otherwise shown on the plans. 2)Splices Alternate bridge designs can differ from the and before grouting. publications (404), (420), (421), (424), (425), (426), (440), (780). OPTIONAL REQUIREMENTS The Engineer will measure the average texture depth in accordance with Tex-436-A, Sand Patch Method and the mean profile depth in accordance with ASTM E-2157, Circular Track Meter of the material treated at a minimum frequency of one per every 7,500 square yards in each wheel path in addition additional compensation will be made for these alternate designs or for
Fuyao Windshield Distortion,
Pasco County Deaths 2022,
Articles T